The MEC-CAN-2802i Add-on card from ICP Deutschland provides a convenient solution for expanding PC systems with CAN-bus interfaces. This card can be integrated into any embedded system with an M.2 2280 slot, offering a standardized form factor. By routing the DB9 interfaces through a 30 cm cable within the enclosure, implementation becomes simplified.
Table of Contents: What awaits you in this article
Efficient Expansion of Systems with MEC-CAN-2802i Add-on Card
The MEC-CAN-2802i is an add-on card that allows for the expansion of systems with two DB9 interfaces. Equipped with the F81601 CAN controller, it supports the CAN-Bus 2.0B EFF protocol. It is also backward compatible with 2.0A SFF and supports baud rates from 10 to 1000K. In addition to these features, the card offers numerous other functions, making it a versatile solution for integrating CAN-Bus interfaces into various applications.
Enhanced functionality with CAN Message Acceptance Filter and galvanic isolation
The expansion card is equipped with CAN Message Acceptance Filters, allowing for precise filtering of CAN messages. It supports a CAN frequency of up to 24MHz, ensuring fast and reliable data transmission. With a built-in 120 Ohm termination resistor, it eliminates signal reflections and improves signal quality. Additionally, the card offers on-board ESD shielding of up to 12kV, protecting the system from electrostatic discharge. Its galvanic isolation up to 2.5kV prevents ground loops and enhances system safety. The termination resistor can be split and easily activated or deactivated using a switch.
The MEC-CAN-2802i add-on card allows for the assignment of a fixed card ID through a switch, enabling multiple cards to be used in a system and addressed individually. Additionally, for monitoring or diagnostic purposes, the add-on card can be operated in silent mode. Despite all these features, the MEC-CAN-2802i has a low power consumption of only 400 mA at 3.3 volts.
Industrial-grade MEC-CAN-2802i: Wide Temperature Range and Compliance with CE/FCC Standards
The MEC-CAN-2802i is a reliable and rugged add-on card that is suitable for industrial applications. It can operate in extreme temperatures ranging from -40 °C to +85 °C, making it ideal for harsh environments. Additionally, it meets the CE/FCC Class B standards, ensuring compliance with industry regulations and electromagnetic interference requirements.
Versatile Add-on Card for Efficient Integration of CAN-Bus Interfaces
The MEC-CAN-2802i add-on card is versatile and can be used in a wide range of applications including industrial PCs, IoT devices, panel PCs, and network expansions. Its seamless integration into embedded systems and expandability make it an efficient solution for integrating CAN-bus interfaces into various applications.
ICP Deutschland’s MEC-CAN-2802i Add-on Card Enables Easy and Efficient Expansion of PC Systems with CAN-Bus Interfaces
The MEC-CAN-2802i Add-on Card from ICP Deutschland provides a simple and efficient way to expand PC systems with CAN bus interfaces. With features like CAN Message Acceptance Filter, termination resistor, and galvanic isolation, this card offers versatile applications in various fields. Its low power consumption and industrial suitability make it a reliable solution for both IoT enthusiasts and industry experts.
